The root cause of the failure of the main motor of the single screw extruder and what is the correct treatment method
2024-09
What is the reason why the main motor of the single screw extruder cannot be started and its treatment method?
The following small series respectively expounds the reasons why the host cannot be started and its treatment methods, as follows.
1. Causes:
(1) The driving procedure is wrong.
(2) There is a problem with the thread of the main motor, whether the fuse is burned.
(3) The interlocking device related to the main motor is activated
2. Treatment method:
(1) Check the procedure and restart the vehicle in the correct driving sequence.
(2) Check the main motor circuit.
(3) Check whether the lubricating oil pump is started, and check the status of the interlocking device related to the main motor. The oil pump does not turn on and the motor cannot be turned on.
(4) If the inverter induction is not finished, turn off the total power supply and wait for 5 minutes before starting.
(5) Check whether the emergency button is reset.
Previous Page:
Next page:
RELATED INFORMATION
Understanding the Benefits and Applications of Parallel Twin Screw Extruders
In the realm of plastic processing machinery, the parallel twin screw extruder stands out as a versatile and effective solution for a variety of applications. This type of extruder is characterized by two screws that run parallel to each other, allowing for efficient melting, mixing, and compounding of materials. The design of the parallel twin screw extruder enables a uniform and consistent outpu
Innovative Applications of Parallel Twin Screw Extruder Technology in Modern Manufacturing
Innovative Applications of Parallel Twin Screw Extruder Technology Introduction to Parallel Twin Screw Extruders The **parallel twin screw extruder** has emerged as a pivotal technology in the realm of manufacturing, particularly within the plastic processing sector. Characterized by two intermeshing screws rotating in the same direction, these extruders are designed to efficiently mix, melt, and
Website
Copyright©Jieyang Deke Machinery Co., Ltd.